COYOTE® HD Dome Closure
The COYOTE® HD Dome Closure offers an alternative fiber organizer to support high density splice applications within the same footprint as our existing 9.5" x 28" COYOTE Dome Closure. The new organizer architecture provides open access for fiber routing, reduces cable sheath openings and simplifies assembly; all factors that save you time and money. When combined with PLP’s patented segmented end plate design, the new closure system offers the ultimate level of flexibility to address your complex network needs.
- Maximum Splice Capacity of 1728 or 3456 depending on cable construction
- 7-Port segmented end plate design provides independent access to each cable port
without disruption to surrounding cables
- Two splice tray designs to support mass fusion splicing, single fusion or a combination
- Modular tray design permits trays to hinge upward or be removed from the stack to allow
multiple splicers to work simultaneously
- Grommet range now accepts fiber optic cable entry of up to 1.38" in diameter
- Size: 13.33" Diameter. x 29.47" L (33.86cm Diameter. x 74.8cm L), includes Sealing Collar
- Approximate Weight: 24lbs.
- Applications: Direct Bury, Manhole, Handhole, Wall/Pole, Aerial Mounting (ADSS and Strand)
- Degree of Protection: Tested in accordance to TELCORDIA® GR-771-CORE Buried, Underground, IP-68
- Max Splice Capacity: 3456; using (12) 80813122 Thin Profile Ribbon Flip Trays, 288 Ct.; 1728 using (6) 80813121 Deep Profile Ribbon Flip Trays, 288 Ct.
- Max Quantity of Cables: 7; Multiple cables can enter each port
- Cable Diameters Supported: Ports 1-7: 0.093"-1.25" (2.4mm-31.8mm); Ports 3 and 6 can support 0.093"-1.38" (2.4mm-35.0mm) upon request
TELCORDIA® is a registered trademark of Telcordia Technologies, Inc.
|COYOTE HD Dome Closures|
|80061406||COYOTE HD Dome Closure for Ribbon - Includes (2) 1-Hole Grommets 0.85"-1.00" (21.6-25.4mm) and (2) 1-Hole Grommets 1.00"-1.25" (25.4-31.8mm)|
|80061407||COYOTE HD Dome Closure with Transition Tray for Ribbon - Includes (2) 1-Hole Grommets 0.85"-1.00" (21.6-25.4mm) and (2) 1-Hole Grommets 1.00"-1.25" (25.4-31.8mm), and (1) 6-Pack of 36" long 0.25" ID Transition Tubing|
|80061408||COYOTE HD Dome Closure for Ribbon - Includes (2) 1-Hole Grommets 1.00"-1.25" (25.4-31.8mm) and (2) 1-Hole Grommets 1.25"-1.38" (31.8-35.0mm)|
|80061409||COYOTE HD Dome Closure with Transition Tray for Ribbon - Includes (2) 1-Hole Grommets 1.00"-1.25" (25.4-31.8mm) and (2) 1-Hole Grommets 1.25"-1.38" (31.8-35.0mm), and (1) 6-Pack of 36" long 0.25" ID Transition Tubing|
|80061488||COYOTE HD Dome Closure for Single Fusion - Includes (2) 1-Hole Grommets 0.60" - 0.85" (15.2 - 21.6mm) and (2) 1-Hole Grommets 0.85" - 1.00" (21.6 - 25.4mm)|
All kits include: (1) COYOTE HD Dome Closure, (1) Dome, (1) Gasket, (1) Collar, (4) 1-Hole Grommets, (1) 12-Pack of 16" Long 0.50" ID Spiral Tubing, and Cable Restraint Hardware
|COYOTE HD Splice Trays|
|80813121||Deep Profile Ribbon Flip Tray, 288 Ct.||80813121 Image|
|808131221||Thin Profile Ribbon Flip Tray, 288 Ct.||80813122 Image|
|80813123||Thin Profile Single Fusion Flip Tray, 72 Ct.||80813123 Image|
|80813301||Thin Profile Single Fusion Flip Tray, 108 Ct.||80813301 Image|
1 The 80813122 thin-profile splice tray can only be used for cables that contain SpiderWeb Ribbon (SWR®) - AFL, Rollable Ribbon (RR) - OFS, Pliable Ribbon - Sumitomo, or FlexRibbon™ - Prysmian.
|COYOTE HD Accessories|
|80813267||Deep Transition Tray Kit for up to 864 Expressed Ribbon Applications||80813267 Image|
SWR® is a registered trademark of AFL.