The FIBERLIGN Lite Tension Dead-End is a dielectric dead-end designed to terminate short-span, low-tension ADSS fiber optic cables in low-voltage environments. Its single-layer component design offers an economical solution for very light loads. The product effectively transfers the low axial load on the cable at the end of the dead-end legs to low uniform radial compression near the dead-end loop.

  • Small diameter wires that comprise each dead-end are a mixture of aluminum and aluminum-clad steel that provide superior fatigue strength to ensure long-term performance

  • Dead-end legs have a pliable latex coating and flared rod ends to avoid scoring or abrasion to the cable jacket during and after installation

  • Dead-end loop will fit a minimum cable diameter of 1-1/2" (38.1 mm) and a maximum of 2-1/4" (57.1 mm)

  • Designed to fit over common guy wire dead-end pole fittings • Extended dead-end loop reduces the need for an extension link • Optimized compact length that allows for fast and easy installation

  • Can be used on most brands of ADSS cable that have low strengths and “standard” jackets

 

Product Information

FIBERLIGN Lite Tension Dead-End - Catalog Pages

 

Installation Instructions

SP-2903 (FIBERLIGN Lite Tension Dead-End)

Catalog Number Cable Diameter Range1 Color Code Length
Dead-End Only Dead-End with Thimble Eye2 Dead-End with Thimble Clevis & Eye Nut3 Dead-End with Thimble Clevis & Extension Link4 in mm in mm
2875001 2875001TE 2875001C1N 2875001C1E1 0.375 - 0.414 9.5 - 10.5 Red 28 0.71
2875002 2875002TE 2875002C1N 2875002C1E1 0.415 - 0.459 10.6 - 11.6 Orange 31 0.79
2875003 2875003TE 2875003C1N 2875003C1E1 0.460 - 0.505 11.7 - 12.8 Green 33 0.84
2875004 2875004TE 2875004C1N 2875004C1E1 0.506 - 0.557 12.9 - 14.1 Pink 37 0.94
2875005 2875005TE 2875005C1N 2875005C1E1 0.558 - 0.615 14.2 - 15.6 Yellow 42 1.07
2875006 2875006TE 2875006C1N 2875006C1E1 0.616 - 0.680 15.7 - 17.3 Blue 45 1.14
2875007 2875007TE 2875007C1N 2875007C1E1 0.681 - 0.750 17.4 - 19.6 Brown 49 1.24
Contact PLP for cable applications not shown
Includes a Thimble Eye (Catalog Number: TE-5). Mount the Thimble Eye with a 5/8" (16 mm) bolt and nut.
Includes a Thimble Clevis (Catalog Number: TC-FO) and an 5/8" Eye Nut (Catalog Number: EN-5).
Includes a Thimble Clevis (Catalog Number: TC-FO) and an Extension Link with Eye Nut (Catalog Number: 71002366).