Compression Dead-End: ACSR, ACSS, ACSS/TW

These Compression Dead-Ends are specially designed for applications on ACSR conductor only. Designs utilize a dual compression product requiring compression of a steel component around the steel core and an aluminum component around the aluminum wire OD. Compression of products can be completed with industry standard presses and dies.

Dead-End Body: Aluminum component of dead end assembly that is compressed around the OD of the conductor.
Steel Dead-End Eye: Steel component of the dead end assembly that is compressed around the OD of the steel core.
Holding Strength: 95% or more of the conductor rated breaking strength (RBS) in accordance with ANSI C119.4 requirements for tensile strength.
Design allows for continuous conductor operating temperatures up to 125°C (150°C two hour emergency).
Dead-End pad is constructed with a 15° angle which allows for the terminal connection of jumper and Dead-End to be bolted together in a 0° or 30° configuration.
Includes: Aluminum Dead-End body, steel dead end eye, felt washer, and filler plug.

Application Procedures

SP3125 (Compression Dead-End and Jumper)

Catalog Pages

Compression Dead-End CMPDE for ACSR Conductors - Catalog

Compression Dead-End CMPDE for ACSS and ACSS/TW Conductors - Catalog

Small Catalog

Compression Hardware Series for ACSR Conductors - EN CA-1009-1

ACSR Catalog Numbers

Table A Compression Dead-end CMPDE for ACSR.jpg