Alloy Side Tie

Preformed Line Products Alloy Ties are intended for use in corrosive environments on aluminum based conductors. They are suitable for use on ANSI C29 compliant insulators. Alloy Ties are designed for use in coastal areas. They have been performance-matched to aluminum conductors and are much more corrosive-resistant than standard aluminized steel ties.

Easily applied by hand or with hot sticks
Performance matched materials
Will not damage the conductor during installation
Conductor application up to 1.24"
Accomodates line angles 0-40° depending on application
Resiliency built in to protect the conductor
Reacts like the conductor under loading
Adheres to NESC Standards
Will hold a minimum of 700 lbs. of unbalanced load (According to rigorous PLP testing)
Suitable for use with either ANSI compliant polymer or porcelain insulators
Made in the USA

Application Procedures

SP-2831 (Alloy Side Tie)

Sales Materials

Alloy Ties - Sell Sheet

Alloy Side Ties - Insulator Ties Catalog Pages

Corrosive Environments Catalog

Diameter Range		Nominal Conductor Size¹	Units per Carton	C-Neck Insulators (Black)		F-Neck Insulators (Yellow)		Conductor Color Code
in				Catalog Number	Applied Length	Catalog Number	Applied Length
Minimum	Maximum			Catalog Number	in	Catalog Number	in
9/16" R. Groove²
0.245	0.277	#4, 6/1, 7/1; #4, 7W Alum. Alloy	100	ASC-5102	23	ASF-5202	23	Orange
0.278	0.315	#3, 7W Alum. Alloy; #2, 7W All Alum.	100	ASC-5103	24	ASF-5203	24	Purple
0.316	0.357	#2, 6/1, 7/1; #2, 7W Alum. Alloy; #1, 6/1 ACSR	100	ASC-5104	25	ASF-5204	25	Red
0.358	0.405	1/0, 7W All Alum.; 1/0, 6/1 ACSR; 1/0, 7W Alum. Alloy	100	ASC-5105	23	ASF-5205	23	Yellow
0.406	0.459	2/0, 7W All Alum.; 2/0, 6/1 ACSR; 2/0, 7W Alum. Alloy	100	ASC-5106	25	ASF-5206	25	Blue
0.460	0.520	3/0, 7W All Alum.; 3/0, 6/1 ACSR; 3/0, 7W Alum. Alloy	100	ASC-5107	27	ASF-5207	27	Orange
0.521	0.588	4/0, 7W All Alum.; 4/0, 6/1 ACSR; 4/0, 7W Alum. Alloy	100	ASC-5108	28	ASF-5208	28	Red
0.589	0.665	266.8, 37W All Alum.; 266.8, 18/1	100	ASC-5109	31	ASF-5209	31	Purple
0.666	0.755	336.4, 19W All Alum.; 336.4, 18/1; 397.5, 19W All Alum.	100	ASC-5110	33	ASF-5210	34	Brown
0.756	0.858	477, 19W, 37W All Alum.; 477, 18/1 24/7, 26/7	50	ASC-5111	35	ASF-5211	36	Red
5/8" R. Groove²
0.859	0.968	556.5, 26/7; 636, 18/1; 700, 37W, 61W All Alum.	50	ASC-5112	36	ASF-5212	37	Blue
11/16" R. Groove²
0.969	1.096	795, 37W All Alum.; 795, 61W All Alum.; 715.5, 24/7; 795, 54/7	50	ASC-5113	38	ASF-5213	39	Green
3/4" R. Groove²
1.097	1.240	954, 36/1, 54/7; 1033.5, 37W, 61W All Alum.	50	ASC-5114	39	ASF-5214	40	Yellow
Right-hand lay standard NOTES: ¹ Nominal Conductor Size indicates one or more of various conductors within each range. ² For the succeeding ranges the insulator's side groove radius should be at least as large as shown above.

Diameter Range		Nominal Conductor Size¹	Units per Carton	J-Neck Insulators (Green)		Conductor Color Code
in				Catalog Number	Applied Length
Minimum	Maximum			Catalog Number	in
9/16" R. Groove²
0.245	0.277	#4, 6/1, 7/1; #4, 7W Alum. Alloy	100	ASJ-5402	26	Orange
0.278	0.315	#3, 7W Alum. Alloy; #2, 7W All Alum.	100	ASJ-5403	27	Purple
0.316	0.357	#2, 6/1, 7/1; #2, 7W Alum. Alloy; #1, 6/1 ACSR	100	ASJ-5404	28	Red
0.358	0.405	1/0, 7W All Alum.; 1/0, 6/1 ACSR; 1/0, 7W Alum. Alloy	100	ASJ-5405	26	Yellow
0.406	0.459	2/0, 7W All Alum.; 2/0, 6/1 ACSR; 2/0, 7W Alum. Alloy	100	ASJ-5406	28	Blue
0.460	0.520	3/0, 7W All Alum.; 3/0, 6/1 ACSR; 3/0, 7W Alum. Alloy	100	ASJ-5407	30	Orange
0.521	0.588	4/0, 7W All Alum.; 4/0, 6/1 ACSR; 4/0, 7W Alum. Alloy	100	ASJ-5408	31	Red
0.589	0.665	266.8, 37W All Alum.; 266.8, 18/1	100	ASJ-5409	34	Purple
5/8" R. Groove²
0.666	0.755	336.4, 19W All Alum.; 336.4, 18/1; 397.5, 19W All Alum.	50	ASJ-5410	36	Brown
0.756	0.858	477, 19W, 37W All Alum.;	50	ASJ-5411	38	Red
0.859	0.968	556.5, 26/7; 636, 18/1; 700, 37W, 61W All Alum.	50	ASJ-5412	39	Blue
0.969	1.096	795, 37W All Alum.; 795, 61W All Alum.; 715.5, 24/7; 795, 54/7	50	ASJ-5413	41	Green
1.097	1.240	954, 36/1, 54/7; 1033.5, 37W, 61W All Alum.	50	ASJ-5414	42	Yellow
Right-hand lay standard NOTES: ¹ Nominal Conductor Size indicates one or more of various conductors within each range. ² For the succeeding ranges the insulator's side groove radius should be at least as large as shown above.