The Coated Dead-End is designed for direct application over conductors jacketed with neoprene, polyethylene, vinyl, or rubber. The sub-setted rods in each leg, bonded together with neoprene, exert a low radial pressure to prevent damage to the jacket. Because it is not necessary to skin the plastic covering, the same dead-end can be used for either aluminum- or copper-based covered conductors.

  • Designed for direct application over conductors jacketed with neoprene, polyethylene, vinyl, or rubber

  • Manufactured from aluminum alloy wire

  • Color-coded for ease of selection in the field

Product Information

Coated Dead-End - Catalog Pages

 

Installation Instructions

SP-2014 (Coated Dead-End)

Catalog Number Diameter Range* Applied Length Conductor Color Code Units per Carton Weight per Carton
Size
in in lb
ND-0500 0.243 0.253 16 Green 100 13
ND-0501 0.254 0.264 17 Red 14
ND-0502 0.265 0.272 17 Black 14
ND-0503 0.273 0.284 18 Orange 14
ND-0100 0.285 0.297 19 Black 15
ND-0101 0.298 0.310 19 Yellow 17
ND-0102 0.311 0.323 20 Blue 18
ND-0103 0.334 .0338 20 Orange 100  18
ND-0104 0.339 0.354 21 Black 20
ND-0105 0.355 0.374 22 Yellow 20
ND-0106 0.375 0.397 23 Red 25
ND-0107  0.398 0.420 24  Green  26 
ND-0108 0.421 0.445 27  Black  50  20 
 ND-0109 0.446  0.475 28  Orange  50 22 

NOTE: Conductor may be right-hand lay or left-hand lay

NOTE: *Application is based n covered conductor outside diameter