The FIBERLIGN Dielectric Support (FDS) system is designed to gently but firmly support ADSS cable. It is intended for tangent support installations on lines that feature relatively low voltages, short spans, and modest mechanical loads.

  • Mounts to pole with a 5/8" through bolt or a banding system with a mounting bracket

  • Supports span lengths up to 600 ft (183 m) NESC Heavy for cables with diameters less than 1.0" and 300 ft (91 m) NESC Heavy for cables with diameters greater than 1.0"

  • Supports line angles up to 20 degrees

  • Housing is made from a high-strength dielectric urethane material

  • Inserts are made from a soft, pliable dielectric material that gently grips and cushions the cable

  • Highly abrasive-resistant surface of the housing allows it to be used as a stringing traveler at the structure

 

Product Information

FIBERLIGN Dielectric Support - Catalog Pages

 

Installation Instructions

SP-2742 (FIBERLIGN Dielectric Support)

FIBERLIGN Dielectric Support

• Each Dielectric Support includes one complete insert (two halves) for the stated cable range 

• Additional inserts are sold as Insert Halves - see table

 

Catalog Number Cable Diameter Range
Support (includes insert) Support with Banding Bracket Kit in mm
44002144 44002144B1 0.275 - 0.325 7.0 - 8.3
44000691 44000691B1 0.326 - 0.375 8.4 - 9.5
44009998 44009998B1 0.376 - 0.425 9.6 - 10.8
44009949 44009949B1 0.426 - 0.475 10.9 - 12.1
44009952 44009952B1 0.476 - 0.525 12.2 - 13.3
44009823 44009823B1 0.526 - 0.575 13.4 - 14.6
44009798 44009798B1 0.576 - 0.625 14.7 - 15.9
44009776 44009776B1 0.626 - 0.675 16.0 - 17.1
44009799 44009799B1 0.676 - 0.750 17.2 - 19.1
44009878 44009878B1 0.751 - 0.825 19.2 - 21.0
44009963 44009963B1 0.826 - 0.900 21.1 - 22.9
44002213 44002213B1 0.901 - 0.950 23.0 - 24.1 
44003915  44003915B1  0.951 - 1.000  24.2 - 25.4 
440010296  440010296B1 1.0001 - 1.050 25.5 - 26.6 
4800000  Housing
710010577 Banding Hardware Only

 

FIBERLIGN Dielectric Support Insert Halves

• Two Insert Halves are required for each support 

 

Catalog Number Cable Diameter Range
in mm
00070061 0.275 - 0.325 7.0 - 8.3
00070052 0.326 - 0.375 8.4 - 9.5
00070056 0.376 - 0.425 9.6 - 10.8
00070059 0.426 - 0.475 10.9 - 12.1
00070107 0.476 - 0.525 12.2 - 13.3
00070088 0.526 - 0.575 13.4 - 14.6
00070108 0.576 - 0.625 14.7 - 15.9
00070109 0.626 - 0.675 16.0 - 17.1
00070110 0.676 - 0.750 17.2 - 19.1
00070111 0.751 - 0.825 19.2 - 21.0
00070112 0.826 - 0.900 21.1 - 22.9
00070113 0.901 - 0.950 23.0 - 24.1
00070147 0.951 - 1.000 24.2 - 25.4
00070154 1.0001 - 1.050 25.5 - 26.6