The Compression Jumpers are specially designed for applications on ACSR and ACSS conductors.

  • Compression of products can be completed with industry standard presses and dies.
  • Aluminum Jumper Body: Aluminum body that is compressed around the OD of the conductor.
  • Holding Strength: 40% minimum of the conductor rated breaking strength (RBS).
  • Designs allow for continuous conductor operating temperatures up to 125°C (150°C two hour emergency).
  • Jumper pad is constructed with a 15° angle which allows for the terminal connection of jumper and dead to be bolted together in a 0° or 30° configuration.
  • Includes:  Jumper body and hardware packages which includes galvanized hardware (4 nuts, 4 bolts, 4 lock washers and 8 flat washers).

 

Application Procedures

SP-3125 (Compression Dead-end and Jumper)

 

Catalog Pages

Compression Jumper Terminal-CMPTM for ACSR Conductors - Catalog

Compression Jumper Terminal - CMPTM for ACSS and ACSS/TW Conductors - Catalog

 

Small Catalog

Compression Hardware Series for ACSR Conductors - EN-CA-1009-1

Compression Jumper Terminal